Canon PG-510 / CL-511 CISS (Continuous Ink Supply System) Kit with 4x40ml ink, without head.
Description : Please select from the list which printer you want to build the system. Compatible with Canon CL-511 Inkjet Printers, the ink supply system consists of 4 tanks (black, cyan, yellow and magenta), the ink can be refilled into the external ink tank individually, depending on what you want to run out of, no need to remove the cartridges. The ink flows continuously from the tank to the cartridge to ensure continuous ink supply. The original factory (full, non-empty) ink cartridge needs to be installed on the ink supply system, so the system does not contain a cartridge. To do this, you need to drill the original cartridges according to the detailed instruction manual provided.
Before You Buy: The original PG-510 / CL-511 ink cartridge is up to approx. It is calibrated for printing 150-200 pages at the factory, so if we buy the cartridge in the store, we can print so much, but with this CISS system we can increase the life of a print cartridge by ten times. Thus, the ink cartridge of the printer is supplied with a continuous ink supply, however, the ink cartridge is basically approx. Calibrated to 150-200 pages, after a while wear out, approx. the cartridge can be folded tenfold when using CISS. If the cartridge is worn out of use, you can simply replace and reconnect the existing CISS system, saving you the print. This applies to this CISS system, but it is not necessary for other printers to replace the ink cartridge, for example. PGI-550 / CLI-551, PGI-525 / CLI-526, etc. in case of. If your printer is not in good condition, you should not buy the CISS system, as the CISS system allows for low-cost printing, but does not fix the printer's existing fault. Before buying, it is advisable to read the instruction manual at the bottom of the page.
The customer's task is to put the system in the printer according to the detailed instruction manual provided with the tools provided, but only for our customers with technical sensitivity. If improper handling fails to install the system, we cannot take responsibility. If the installation fails, we can help you, please contact our customer service.
Since the original cartridges are "disposable", after some time, the ink level monitoring indicates that the cartridges are "empty". This error message can be easily eliminated by keeping the circle triangle button pressed for 15 seconds to turn off ink level monitoring.
Package Contents:
- PG-510 / CL-511 ink supply system without head (can be built on a full cartridge in your printer, so it does not contain a set head)
- 4x70ml ink (PG-510 black, CL-511 Yellow, Cyan, Magenta), basically packed with standard ink
- Installation accessories (aeration, fastener, etc., except drill, see user manual)
- Detailed Hungarian Installation Guide
Warranty : 1 Year.
Responsibility : Please select from the list the printer you want to build CISS, as each printer requires different components to install. We are not responsible for any damage caused by the negligence of the user. The picture is an illustration.
Compilation : * You can use the CISS system for an extra charge: the essence of the prepared external ink supply system is to pre-charge CISS with ink, or Bleed the tank and tubes, so you only have to place the external ink supply system with the help of the supplied user manual. If you do not request the preparation of the CISS system, please indicate "NO". If "NO" is marked, we will pack the ink next to the CISS system, you will need to fill and bleed it, prepare the external ink supply system according to the supplied installation guide. Look at the video below to make it possible to extend the life of your ink cartridge up to ten times with the PG-510 / CL-511 ink cartridge, as the ink cartridge is also the print head.
Compatibility : The set is compatible with the following printers (if your printer is not listed, please indicate):
